SLOTTED SET SCREWS, STUDS, THREADED ROD, KNOBS -- Chapter H
Note: Many links below select a group of pages. Use your vertical scroll bar
to see all the pages.
- Chapter H -- DIN 551/ISO 4766-14H STEEL
SLOTTED SET SCREW, FLAT POINT, PLAIN FINISH
- Chapter H -- DIN 551/ISO 4766-14H STEEL
SLOTTED SET SCREW, FLAT POINT, ZINC PLATED
- Chapter H -- DIN 553/ISO 7434-14H STEEL
SLOTTED SET SCREW, CONE POINT, ZINC PLATED
- Chapter H -- DIN 417/ISO 7435-14H STEEL
SLOTTED SET SCREW, DOG POINT, ZINC PLATED
- Chapter H -- DIN 438/ISO 7436-14H STEEL
SLOTTED SET SCREW, CUP POINT, ZINC PLATED
- Chapter H -- DIN 427-14H STEEL
SLOTTED SET SCREW, FLAT POINT, PARTIALLY THREADED, ZINC PLATED
- Chapter H -- DIN 939 Fo STEEL
STUD, NUT END & TAP END WITH NORMAL THREAD TOLERANCE 6g, PLAIN FINISH
- Chapter H -- DIN 939-8.8 Fo STEEL
STUD, NUT END & TAP END WITH NORMAL THREAD TOLERANCE 6g, PLAIN FINISH
- Chapter H -- DIN 939-8.8 STEEL
STUD, TAP END WITH NORMAL THREAD TOLERANCE Sk6, ZINC PLATED
- Chapter H -- DIN 835-8.8 STEEL
STUD, TAP END WITH NORMAL THREAD TOLERANCE Sk6, ZINC PLATED
- Chapter H -- DIN 975-4.8/8.8 STEEL
THREADED ROD, PLAIN FINISH
- Chapter H -- DIN 975-4.8/8.8 STEEL
THREADED ROD, ZINC PLATED
- Chapter H -- DIN 975-4.6/4.8 STEEL
THREADED ROD, LEFT HAND THREAD, PLAIN FINISH
- Chapter H -- DIN 975-4.6/4.8 STEEL
THREADED ROD, FINE THREAD, PLAIN FINISH
- Chapter H -- DIN 975-4.6/4.8 STEEL
THREADED ROD, BSW (BRITISH STANDARD WHITWORTH) THREAD, PLAIN FINISH
- Chapter H -- DIN 975-4.6/4.8 STEEL
THREADED ROD, BSPP (BRITISH STANDARD PIPE PARALLEL) THREAD, PLAIN FINISH
- Chapter H -- DIN 464-4.8/5.8 STEEL
KNURLED THUMB SCREWS, HIGH TYPE, ZINC PLATED
- Chapter H -- DIN 653-4.8/5.8 STEEL
KNURLED THUMB SCREWS, FLAT TYPE, ZINC PLATED
- Chapter H -- K810 STEEL
HEX STANDOFF, MALE x FEMALE, ZINC PLATED
- Chapter H -- K811 STEEL
HEX STANDOFF, MALE x FEMALE, ZINC PLATED
- Chapter H -- K819 STEEL
HEX STANDOFF, FEMALE x FEMALE, ZINC PLATED
- Chapter H -- DIN 551/ISO 4766-BRASS
SLOTTED SET SCREW, FLAT POINT
- Chapter H -- DIN 553/ISO 7434-BRASS
SLOTTED SET SCREW, CONE POINT
- Chapter H -- DIN 975-BRASS
THREADED ROD
- Chapter H -- DIN 464-BRASS
KNURLED THUMB SCREWS, HIGH TYPE
- Chapter H -- DIN 653-BRASS
KNURLED THUMB SCREWS, FLAT TYPE
- Chapter H -- DIN 551/~ISO 4766-POLYAMID 66 (NYLON)
SLOTTED SET SCREW, FLAT POINT
- Chapter H -- DIN 975-POLYAMID 66 (NYLON)
THREADED ROD
- Chapter H -- DIN 551/ISO 4766-A1 STAINLESS STEEL
SLOTTED SET SCREW, FLAT POINT
- Chapter H -- DIN 553/ISO 7434-A1 STAINLESS STEEL
SLOTTED SET SCREW, CONE POINT
- Chapter H -- DIN 939-8.8 Fo A4 STAINLESS STEEL
STUD, NUT END & TAP END WITH NORMAL THREAD TOLERANCE 6g
- Chapter H -- DIN 975-A2 STAINLESS STEEL
THREADED ROD
- Chapter H -- DIN 975-A4 STAINLESS STEEL
THREADED ROD
Note: Many links above select a group of pages. Use your vertical scroll bar
to see all the pages.
You may use our 
or you may use our faxable/mailable 
Return to
Fastener Catalog Master Index Page.
The price category for this chapter is A1.
Prices and discounts published here are ONLY valid for *Internet Purchases.
*See 'How to order'
instructions for internet fastener catalog purchases. Please
inquire about pricing for customer service department assisted purchases.
|
